Foma N901iS, User Manual

Page: 397 / 580

395
Displa
ying,
Editing and Or
ganizing Files
・
The sent mail overwrites the oldest unprotected sent mail in the Outbox.
・
You cannot forward the folder for the mail linkage i-
α
ppli received mail. All the mails in the folder are
saved to the Inbox.
・
Some pictographs or symbols used in the mail message may not be displayed correctly on the receiving
device if it does not support them.
・ If you receive an image or movie larger than 10,000 bytes attached to mail, the file is saved to the Data
box and linked to the corresponding mail. If there is no further storage space available in the Data box,
the attached file is deleted when the mail is stored.
・ You cannot quote the data attached to i-mode mail.
Transferring one data at a time
Exchange one data at a time between your FOMA terminal and PC/another FOMA terminal.
●
You cannot send a data from the FOMA terminal to PC by cable connection.
●
The progress bar indicates the number of data being sent. Transferring a PDF document may pop up the
bar twice even if the data is properly transferred.
Sending one data at a time by Infrared data exchange <Send Ir data>
Select “Send Ir data” from the function menu of Data list screen or detail screen.
●
You can send only one data at a time.
<Example: Send one phonebook data>
1
Phonebook detail screen (P.101)
p
(FUNC) “Send Ir data”
Searching in the phonebook → P.101
2
Direct the Infrared data port toward your party “YES”
Make sure that your party is ready to receive data.
The data starts being sent.
A message appears indicating that the sending is completed.
■ To cancel the sending
“NO”
■ To exit during the sending
o
(Quit)
Receiving one data at a time by Infrared data exchange <Receive Ir data> i79
1
i
“Receive Ir data”
The “Receive Ir data screen” appears.
2
“Receive” Direct the Infrared data port toward your
party Receive data from the FOMA terminal of your
party
The data starts being received.
The communication level bar may not be displayed depending on your party.
3
“YES”
A message appears indicating that the receiving is completed.
The received data will be erased if you do not operate your FOMA terminal at all for 30 seconds or so after
you receive the data.
■ To not save the received data
“NO”
NOTE
● Even if you select “Receive”, you may receive all Ir data. If this is the case, operate the FOMA terminal following the
Receive all instructions.
Receive Ir data
Ｒｅｃｅｉｖｅ Ｉｒ ｄａｔａ
Ｒｅｃｅｉｖｅ ａｌｌ
Ｒｅｃｅｉｖｅ
Ｓｅｌｅｃｔ ＦＵＮＣ
Function menu P.398