Foma N901iS, User Manual

Page: 220 / 580

218
i-mode
1
i-mode setting screen (P.216) “Use saved data” Select any item:
<Receive message>
When You Receive a Message
When the FOMA terminal is in an i-mode service area, Message Request and Message Free are
automatically sent to the FOMA terminal from the i-mode Center.
● The FOMA terminal will save up to 100 received Message Request and Message Free respectively.
However, the number that can actually be saved varies between 20 and 100 for Message Request and
between 10 and 100 Message Free depending on the amount of data in each saved message.
● You can set your own choice of ring tone for incoming Message Request and Message Free in “Select ring
tone” (P.114) and vary the flashing pattern used by the incoming call lamp in “Illumination” (P.131).
● To use the Short Message Service (SMS), see P.294.
Viewing received new messages
●
To prevent the FOMA terminal from automatically displaying new messages when they arrive, select “OFF”
in “Message auto display” (P.216).
The “ (green)” or “ (purple)” icon flashes and the “MessageR Receiving...” or
“MessageF Receiving...” message is displayed.
･ Once reception is finished, the icon stops flashing and remains displayed.
･
To stop reception while a message is being received, hold down
t
for 1 second
or longer. However, a message may be downloaded depending on the timing of
the cancellation.
･
Once reception is finished, the numbers of each type of mail and Message
Request/Free received are displayed in the reception results screen for roughly 15
seconds. The display period for the reception results screen may vary depending
on the setting of “Mail/Msg. ring time” (P.118).
･
To view the Message Request list screen or Message Free list screen, select
“MessageR” or “MessageF”.
･ If you have received a message while the FOMA terminal is in standby mode, the
contents of the received Message Request or Message Free are displayed for
roughly 15 seconds. However, if the standby screen was retrieved from the Task
menu while any of the menu functions was being used, messages are not
automatically displayed.
･
If you use operations such as scrolling while a Message Request or Message
Free is displayed, the message continues to be displayed.
･
If none of the FOMA terminal keys are used for 15 seconds, the standby screen
reappears.
■
When you disable automatic display
The reception results screen appears when you receive a Message Request or Message Free while using
the FOMA terminal.
Item Description
YES Sets the FOMA terminal to use stored data when running Flash movie.
NO Sets the FOMA terminal not to use stored data when running Flash movie.
NOTE
●
Automatic display for Message Request/Free can be selected in “Message auto display”. If you do not want to appear the
message automatically, select “OFF”.
●
When a new Message Request/Free arrives, the FOMA terminal receives the message together with any Message
Request/Free or i-mode mail held at the i-mode Center.
ＭｅｓｓａｇｅＲ
Ｒｅｃｅｉｖｉｎｇ．．．
Ｓｅｌｅｃｔ
Ｒｅｔｕｒｎ
Ｒｅｃｅｉｖｅｄ ｒｅｓｕｌｔ
Ｍａｉｌ ０
ＭｅｓｓａｇｅＲ ４
ＭｅｓｓａｇｅＦ ０
１／ ４
−−−−ＥＮＤ−−−−
２００５／１０／ ３ １２：０５
Ｒｅｓｔａｕｒａｎｔｓ
○・○○○ ａ ｆｒｅｎｃｈ ｒ
ｅｓｔａｒａｎｔ ｉｎ Ｓｈｉｂｕｙａ．
ｉｓ ｏｆｆｅｒｉｎｇ ａ ｆｒｅｅ ｃｏｆ
ｆｅｅ ｗｉｔｈ ｔｈｅｉｒ ｓｅｔ ｌｕｎ
ｃｈ．
Ｍｓｇ．Ｒｅｑｕｅｓｔ