Foma N901iS, User Manual

Page: 145 / 580

143
Security Settings
<All lock/Remote all lock>
Preventing Others From Using Your Terminal
You can set All lock either using the FOMA terminal or remotely.
● When All lock is applied, none of the functions can be used except for the following:
・ Turning the FOMA on/off
・ Calling emergency numbers (110, 119 or 118).
・ Canceling All lock
・ Receiving remote observation calls
● Setting All lock sets “IC Card lock” to “ON”, which inactivates IC Card functions. You cannot set/release “IC
Card lock” with All lock set.
● Turning the FOMA terminal off does not cancel All lock.
● You cannot answer a call while All lock is on.
Using the FOMA terminal to set All lock
1
i
”Lock/Security” “All lock” Enter your security code
All lock is set and “All lock”, “ ”, and “ ” appear on the screen.
Security code → P.140
Setting Remote all lock i99
Default setting Remote all lock: OFF Monitoring (minutes): 3 Recv. calls (times): 5
Use this procedure to set the All lock function on your FOMA terminal from a pay phone or other
phone.
● Remote all lock allows you to set the All lock function on your FOMA terminal when it receives the number
of missed calls set in “Received calls (times)” from the phone number set in “Accept phone No.” or from
public phone within the time set in “Monitoring (minutes)”.
● Remote all lock can be set with voice or videophone calls.
●
You need to notify the caller ID if you call from the number set in “Accept phone number”.
● Calls received during another call (including calls received during a call when “Call waiting” is activated) do
not trigger the start of the monitoring time and are not counted as received calls.
1
i
“Lock/Security” “Remote all lock” Enter
your security code “ON” “Accept phone No.”
“Store accept phone No. screen” appears.
Security code
→ P.140
2
“<Not recorded>” Enter phone number
o
(Finish)
■ To change the currently stored accept phone number
Choose the Accept phone No. stored setting
You can store up to 3 accept phone numbers.
3
“Monitoring” Enter the monitoring time (01-10
minutes)
Sets the monitoring period during which Remote all lock can be set once a call from the accept phone
number has been missed.
Enter a 2-digit number as the time. To use the time already displayed, just press
d
.
4
“Received calls” Enter the Received calls (03-10 times)
Sets the number of calls from the accept phone number that will set the remote all lock function.
Enter a 2-digit number as the number of calls. To set the number currently shown, just press
d
.
5
o
(Finish)
Default setting
Release
Ａｌｌ ｌｏｃｋ
Ｒｅｍｏｔｅ ａｌｌ ｌｏｃｋ
＜Ｎｏｔ ｒｅｃｏｒｄｅｄ＞
＜Ｎｏｔ ｒｅｃｏｒｄｅｄ＞
＜Ｎｏｔ ｒｅｃｏｒｄｅｄ＞
Store accept phone No.
Ｓｅｌｅｃｔ Ｆｉｎｉｓｈ ＦＵＮＣ
Function menu P.144