Foma N901iS, User Manual

Page: 480 / 580

478
Data Comm
unication
2
Select “64K データ通信 ” (64K data
communication) and click “ 次へ ” (Next)
3
Select “
「
mopera U
」への接続
” (mopera U
access) or “
「
mopera
」への接続
” (mopera
access) and click “
次へ
” (Next)
See P.478 if you use a provider other than mopera
U or mopera.
4
Enter the access point name and
modem, and click “
次へ
” (Next)
The “64K デ ー タ 通 信設 定 ” (64K data
communication setting) screen appears. You can
specify the name of the access point. Enter a
name easy to recognize in the “
接 続 名 ”
(Connection Name) column.
Enter the connection name correctly including
upper/lower case.
You cannot use the following reserved characters:
¥/:
＊ ?!<> │ (half-pitch only).
When using the FOMA USB Cable (optional),
confirm that modem name is set to “FOMA
N901iS”.
5 Specify a user name and
password and click “ 次へ ” (Next)
You can leave user name and password blank for
the mopera U or mopera connection.
Select the user for Windows 2000/XP.
If you are not sure which user to select, choose “
す
べてのユーザー ” (All users) (default setting).
When setting the user name and password, input
the correct, case-sensitive data provided by the
service provider.
6 Check the setting information and
click “ 完了 ” (Finish)
The contents that were set will be listed. Make
sure that all settings are correct.
Checking “
デ ス ク トッ プ に ダ イヤ ル ア ップ の
ショートカットを作成する ” (Add dial-up shortcut
on desktop) automatically creates a shortcut icon.
To change any setting, click “ 戻る ” (Back).
7 Click “OK”
The communication set up is carried out on the
next step.
→ P.479
Easy settings: “Specifying 64K communication
settings using other providers”
1
Click “ かんたん設定 ” (Easy settings)
2
Select “64K
データ通信
” (64K data
communication) and click “
次 へ
”
(Next)
3
Select “ その他 ” (Other) and click “
次へ ” (Next)
4
Enter the dial-up information and
click “ 次へ ” (Next)
Register the following items in order to connect to
a service provider with ISDN synchronous 64K
access points other than mopera U or mopera
when creating a dial-up;
•
“ 接続名 ” (Connection Name) (optional)
• “ モデムの選択 ” (Modem Selection) (FOMA
N901iS)
• Phone number
Enter the connection name correctly including
upper/lower case.
You cannot use the following reserved characters:
¥/:
＊ ?!<> │ (half-pitch only).
Enter the correct information according to the
provider information. Enter the phone number with
half-pitch taking care of upper/lower case characters.
If “
発 信 者番 号 通 知 を行 う
” (Notify Caller ID) is
checked off, the Caller ID will be notified when
communication is carried out.
<To specify advanced settings (TCP/IP)>
When you click “ 詳細情報の設定 ” (Detailed settings),
the screen for the “IP address” and “Name server”
settings will appear. If they must be input as the
provider or corporate LAN information, follow the input
information directions and enter the addresses.
(Windows 2000, Windows XP)