Foma N901iS, User Manual

Page: 398 / 580

396
Displa
ying,
Editing and Or
ganizing Files
Receiving one data at a time by cable connection <Write one>
●
The method to transfer data varies by the transferring software. Follow the instructions to the software for
more details.
1 “Write one” by using the transferring software on PC
2
Send data from PC
A large amount of data may slow down the progress indicator showing the communication speed.
3
“YES”
A message appears indicating that the receiving is completed. After the data is received, if you do not
operate your FOMA terminal at all for 30 seconds or so, the received data is discarded.
■ To not save the received data
“NO”
Transferring multiple data at the same time
Exchange multiple data at the same time between your FOMA terminal and PC/another FOMA
terminal.
● Transferring all the data overwrites the data stored on the FOMA terminal. The stored data, including the
protected mail or secret data, are erased. However, the frames or Flash movies are not erased. Make sure
that the data to be overwritten are not important to you.
● Transferring all requires the session number to authenticate the sender and recipient.
Session number
→ P.396
● The progress bar shows the communication speed of sending the data. A large amount of data may slow
down the progress indicator or it may seem different between the parties even if the data are being
transferred successfully.
● Transferring all may change the order of data on the recipient.
Session number
●
Transferring all requires the session number to authenticate the sender and recipient. Before sending or
receiving, the sender and recipient should agree on a 4-digit number as the session number and then both
enter the same number.
Sending multiple data at the same time by Infrared data exchange <Send all Ir data>
Select “Send all Ir data” from the function menu of Data list screen or detail screen.
<Example: Send all data stored in the phonebook>
1
Phonebook list screen (P.102)
p
(FUNC) “Send all Ir data”
Searching in the phonebook → P.101
2 Enter your security code Enter session number
Security code
→
P.140
Session number → P.396
3
Direct the Infrared data port toward your party “YES”
Make sure that your party is ready to receive all data.
All the data start being sent.
A message appears indicating that the sending is completed.
■
To cancel the sending
“NO”
■ To exit during the sending
o
(Quit)