Foma N901iS, User Manual

Page: 399 / 580

397
Displa
ying,
Editing and Or
ganizing Files
Receiving multiple data at the same time by Infrared data exchange <Receive all Ir data>
1
Receive Ir data screen (P.395) “Receive all”
2 Enter your security code Enter session number
Security code
→
P.140
Session number → P.396
3
Direct the Infrared data port toward your party “YES”
■ To cancel the receiving
“NO”
4
Receive all data from the FOMA terminal of your party
All the data start being received.
■ To exit during the receiving
o
(Quit)
5
Press “YES” on the Overwrite confirmation screen
A message appears indicating that the received data is stored completely.
■ To cancel the receive all Ir data
“NO”
Sending and Receiving multiple data at the same time by cable connection <Write all/Read all>
●
The method to transfer data varies by the transferring software. Follow the instructions to the software for
more details.
<Example: Send all data from the FOMA terminal to PC>
1
Use the transferring software on PC to send all data from the FOMA
terminal
You need to enter the session number on PC.
Enter a 4-digit number for the session number.
2
Enter your security code on the FOMA terminal Enter session number
on the FOMA terminal
The data are transferred. When the transfer is finished, you receive a message that it is completed.
Security code
→
P.140
Session number
→
P.396
<Infrared data exchange mode>
Setting Infrared data exchange mode
Receive the i-
α
ppli launch settings data from the Infrared data exchange device supporting i-
α
ppli
launch, and you can run the software.
● Download the software from the website in advance. → P.301
1
Receive Ir data screen (P.395) “Receive” Receive i-
α
ppli launch
settings data from the Infrared data exchange device
Receiving the i-
α
ppli launch settings data runs the software.
The operations after the launch vary by the software.
■ To cancel the receiving
o
(Cancel) or
t
NOTE
● If the software was not found, a message appears indicating that it was not found.