Foma N901iS, User Manual

Page: 503 / 580

501
Continued on next page
Data Comm
unication
●
Supplementary explanation of AT command
■ Commands which do not function
The following commands do not generate errors but will
not function as a command:
・ ATT (Tone setting)
・ ATP (Pulse setting)
■ Command name: +CGDCONT
・ Outline
Set the access point name (APN) for packet origination.
Though this command is a setting command, it will
not be recorded in non-volatile memory written by
[&W], nor reset by [&F] or [Z].
・ Format
+CGDCONT=[ <cid>[ ,“PPP”[ ,“<APN>”] ] ]
・ Explanation of the parameters
Set the access point name (APN) for packet
origination. See the following command execution
example:
<cid>
*
： 1 ~ 10
<APN>
*
： Any value
* ： <cid> is a number for managing the access point
name (APN) registered in the FOMA terminal for
a packet communication. For the FOMA
terminal, you can register from number 1 to 10.
“mopera.ne.jp” is registered to <cid>=1 and
ATS103=
n
[&F]
Sets the called subaddress
character. n
= 0 : ＊
n
= 1 ： / (Default)
n
= 2 ： ¥ (¥ mark or back slash)
ATS103=0
OK
ATS103?
000
OK
ATS103=?
ERROR
ATS104=
n
[&F]
Sets the calling subaddress
character.
n
= 0 : #
n
= 1 : % (Default)
n
= 2 : &
ATS104=0
OK
ATS104?
000
OK
ATS104=?
ERROR
ATV
n
[&F] [&W]
Specify whether the result
code is returned in numeral
or alphabetical characters.
n
= 0 : Return the result code in numeral
value.
n
= 1 : Return the result code in characters
(initial value).
ATV1
OK
ATX n
[&F] [&W]
Specify whether the speed
indication is present in the
CONNECT display when
connecting the line.
Also detect a busy tone or a
dial tone. n = 0 : Without dial tone detection; without
busy tone detection; without speed
display.
n = 1 : Without dial tone detection; without
busy tone detection; with speed
display.
n = 2 : With dial tone detection; without
busy tone detection; with speed
display.
n = 3 : Without dial tone detection; with
busy tone detection; with speed
display.
n = 4 : With dial tone detection; with busy
tone detection; with speed display.
(initial value)
ATX1
OK
ATZ Reset the current setting to
the contents of the non-
volatile memory.
If this command is input
during communication, the
line will be disconnected.
−
(Online command
mode)
ATZ
NO CARRIER
(Offline command
mode)
ATZ
OK
+++ In response to the escape
sequence, the online date
mode changes to the online
command mode while
maintaining the line
connection.
−
(Online data mode)
+++ (No display)
OK
AT command Outline Description of parameters Command execution example