Foma N901iS, User Manual

Page: 498 / 580

496
Data Comm
unication
AT+CGEQMIN Register a criterion to be
used to decide whether or
not to allow the QoS
(quality of service) that is
informed from the network
side when PPP packet
communication is
established. AT+CGEQMIN=[parameter]
（ P.502 ）
AT+CGEQMIN=?
：
Display a list of values that can be set.
AT+CGEQMIN?
： Displays the current setting.
P.502
AT+CGEQREQ Set the QoS (quality of
service) to be requested to
network when originating a
PPP packet communication. AT+CGEQREQ=[parameter]
（
P.502
）
AT+CGEQREQ=?
： Display a list of values that can be set.
AT+CGEQREQ?
：
Displays the current setting.
P.502
AT+CGMR Display the version of the
FOMA terminal.
−
AT+CGMR
12345xxxxxxxxxx
OK
AT+CGREG=
n
[&F] [&W]
Specify whether to notify
the network registration
condition.
The returned notification
shows whether you are
inside or out of service.
n
= 0 : Not informed (initial value).
n
= 1 : Informed.
Informed when switching between
“Inside the service area” and
“Outside the service area” is
completed.
AT+CGREG?
： Displays the current setting.
+CGREG ： < n >, <stat>
n
: Set value
stat ：
0: Out of packet area
1: Within packet area
4: Unknown
5: Within packet area
AT+CGREG=1
OK (Set to informed)
AT+CGREG?
+CGREG:
（
1,0
）
OK
AT+CGREG=?
+CGREG:
（
0,1
）
OK
(Outside the service area)
(When you move from
“outside the service
area” to “inside the
service area”.)
+CGREG:1
AT+CGSN Display the product number
of FOMA terminal.
−
AT+CGSN
12345xxxxxxxxxx
OK
AT+CLIP= n Displays the other party’s
Caller ID on a PC when a
64K data communication
call is received. n = 0 : Not display the result (Default)
n = 1 : Display the result
Result: +CLIP( n , m )
m
= 0 : NW setting not notifying the other
party of the Caller ID outgoing call.
m
= 1 : NW setting notifying the other party
of the Caller ID outgoing call.
m
= 2 : Unknown
AT+CLIP=0
OK
AT+CLIP=?
+CLIP:(0.1)
OK
(A call is received
when +CLIP=1 is set)
RING
+CLIP:
“090XXXXXXXX”,177,“123”
,136
AT+CLIR=
n
Sets whether or not to
notify the other party of the
phone number when
originating a 64K data
communication call.
n
= 0 : Complies with the CLIR service
contract.
n = 1 : Not notify the other party of the
caller’s phone number.
n = 2 : Notify the other party of the caller’s
phone number (Default).
Result: +CLIR(
n 、 m
)
m =0 : CLIR is not started (Caller ID is
always sent)
m = 1 : CLIR is started (Caller ID is always
not sent)
m
= 2 : Unknown
m = 3 : CLIR temporary mode (default is not
notify)
m
= 4 : CLIR temporary mode (default is
notify)
* Without the ＃ 31 ＃ or
*
31 ＃ , CLIR
setting is first.
AT+CLIR=0
OK
AT+CLIR?
+CLIR:0,1
OK
AT+CLIR=?
+CLIR:(0-2)
OK
AT command Outline Description of parameters Command execution example