40
Before Us
ing D7
02i
INFORMATION
●
The FOMA terminal display uses an active LCD. Due to the characteristics of active LCD, residual images or
crossbar may remain for a while when the battery pack is attached or removed. This is not a fault
of FOMA terminal.
Charging the battery of FOMA terminal
When the battery level is low, charge the battery.
・
The battery level icon shows how much charge remains in the battery.
☛
P43
・
Continuous call time is an estimate of call time for FOMA terminal when it can send or receive signals
normally.
・
Continuous standby time is an estimate of operation time of FOMA terminal when it is able to receive
signals normally. The call/standby time may be reduced to about half, depending on the amount of charge
in the battery, the function settings, the ambient temperature and signal conditions (radio waves do not or
hardly reach). Using i-mode communication reduces the call (communication)/standby time. Even if you do
not make a call or use i-mode, the call (communication)/standby time will be reduced by composing i-mode
Mail, or starting downloaded i-
α
ppli software or the i-
α
ppli standby display.
・
Continuous standby time (while standing still) is the average operation time of FOMA terminal when it
is standing still and able to receive signals normally.
・
Continuous standby time (while moving) is the average operation time of FOMA terminal that is standing
still, moving and outside the service area when it is able to receive signals normally.
・
Alternatively, if you perform data communication or Multiaccess, use Camera or play video/i-motion,
the call (communication)/standby time will be reduced.
The battery pack can be charged regardless of whether FOMA terminal is turned on or off. However,
charging takes longer with the power turned on.
Battery recycling
FOMA terminal uses a lithium ion battery containing valuable materials that should be recycled. To protect the
environment, return used batteries to an NTT DoCoMo service counter, NTT DoCoMo agent or recycling center.
●
Please take the following precautions when recycling batteries:
・
Attach a piece of adhesive tape on the terminals of used battery packs
・
Do not disassemble or modify battery packs
Charging time and operation time on full charge (estimates)
Charging time
Continuous call time
Continuous standby time
Approx.
140 minutes
During a voice call: Approx. 170 minutes
During a videophone call: Approx. 105 minutes
While standing still: Approx. 560 hours
While moving: Approx. 400 hours
Battery pack
●
Use the battery pack D07.
●
The battery pack is a consumable part and will gradually wear out. Each time it is charged, it will accept
slightly less charge than the previous time. When the battery charge lasts only half as long as when it was
new, replace it with a new one. The battery pack’s life is about 1 year. This life may be shorter depending
on the frequency of use.
Starting/ending charging and other items to note
Li-ion
Chargin
g
the battery of FO
MA
te
rm
in
a
l
Summary of Contents for D702i
Page 1: ......
Page 341: ...Appendix Data Interchange Troubleshooting 339 KUTEN code input list ...
Page 361: ...359 INDEX Quick Reference Manual INDEX 360 Quick Reference Manual 364 ...
Page 372: ......