Foma D702i, Manual

Page: 150 / 405

148
Cam
e
ra
■ Setting the image for the standby display:
m21 z
Select
Yes
The shot still image is saved and set for the standby display.
･
If zooming is available for the still image, select Yes (Same size) to maintain the image size or
select
Yes (Large size)
to enlarge it to the screen size.
･
If the i-
α
ppli standby display has been set, a confirmation screen asking whether or not to
cancel it is displayed continuously.
■
Adding the image to phonebook entries (only when the image size is 96 x 72
(phonebook)):
m2 z 2
or
3 z
Select Yes
The shot still image is saved to FOMA terminal and the phonebook registration screen is
displayed.
･
To register updating, select the phonebook data to register.
■ Changing the title:
m31 z
Enter the title (up to 31 characters regardless of one-
byte or two-byte)
z p
■ Adjusting the brightness or color balance:
p
This brings you to the still image correction mode. For the subsequent steps,
☛
P251
･ When the image size is 640 x 480 (VGA LANDSCAPE), 480 x 640 (VGA PORTRAIT), 960 x
1280 (SXGA) or 1024 x 1280 (1.3M), it cannot be corrected.
■ Saving as mirror image (only when shooting with the in-camera):
m41
･
When a frame is set, mirror image saving is unavailable.
■ Switching the normal display/mirror display (only when shooting with the in-camera):
m42
■ Displaying the list of images stored in FOMA terminal:
m6
4
o
or
C
The shot still images are saved in
Camera
folder of
Image
(My Picture).
■ Checking the saved still image immediately:
p z
Select the still image
･
For the operations while displaying the images
☛
P246 Step 3 in “Displaying images”
･ Press
c
twice to return to the still image shooting screen.
･
The images cannot be checked when Camera is started from the phonebook, mail or i-
α
ppli.
INFORMATION
● Saving the shot still image may take time depending on the image size or quality.
● When there is not enough available storage space to save, or you have exceeded the maximum allowable
number of images, delete unnecessary images or change the settings of image size and quality to lower values
according to the screen.
● Shooting still images during a voice call may interrupt the call.
● If there is an incoming call before the shutter sound is heard during standby for shooting still image, shooting
will stop. When the shutter sound has been heard and a still image has been shot already, the still image is
saved automatically if Auto save is set to Yes . If Auto save is set to No , a confirmation screen is displayed after
the end of the call. However, the shot still images may be discarded depending on the timing of receiving calls.
● You cannot use the following functions at the confirmation screen when Camera is started from the phonebook or mail:
●
Even if you shoot while setting Shooting date/time to Date or Date
＋
Time in Still Image Setting, the date or the
time is not displayed on the confirmation screen. The date or the time is displayed on the saved still image. In
addition, on the still image with the display size of 640 x 480 (VGA LANDSCAPE) or more, if you press
t
on
the confirmation screen and display the still image at the same size, the date or the time is displayed.
●
Following settings should be set for the out-camera and the in-camera respectively. When you switch between
them, the settings also change accordingly.
･
Composing mail
･
Standby display settings
･
Saving images in the phonebook
･
Adjustment
･
Displaying the same size
･
Displaying the image list
･
Scene mode/effect
･
Frame
･
Image quality
･
Size restrictions
･
Image size
S
till Ca
me
ra