Foma D702i, Manual

Page: 146 / 405

144
Cam
e
ra
Before using the camera
Still images and videos can be shot with your FOMA terminal camera. Still images and videos can
be displayed/played on FOMA terminal, sent via i-mode Mail as attachments or sent via infrared
communication.
･
Note that though the camera is manufactured using extremely accurate technology, some pixels and
lines may always be displayed to be lighter or darker than you expect. Noise such as dots and lines
may increase especially when you shoot in a place with very low light intensity, but note that such
noise is not a malfunction.
･
When the lens is exposed to direct sunlight for a long period of time, the inside color filter will become
discolored and images may be correspondingly discolored as well.
･
When you attempt to shoot a strong light source such as the sun or a lamp or when the battery level is
low, the image may become dark or degraded.
･
Depending on the characteristics of the lens, displayed images may be distorted.
･
If you shoot under illumination flickering at high frequencies such as fluorescent lights, mercury vapor
lights, and sodium lights, a striped pattern may appear on the screen, but this is not a malfunction. To
minimize the pattern, change the angle or distance of shooting, or move to a slightly different place.
･
Images taken with the camera may differ from the actual subjects in color and brightness, depending
on conditions.
･
If the lens is contaminated with fingerprints or skin oil, you cannot shoot clean images. Use a soft cloth
to remove any such contaminants before shooting.
･
Hold your FOMA terminal firmly to prevent blurring when shooting. If you use auto timer, you can avoid
blurring of images due to hand shake because the shutter is automatically released.
☛
P152
･
Do not cover the lens with fingers or strap.
･
Set the brightness depending on the situation of the shooting.
☛
P153
･
With the out-camera, shoot an object from 50 cm or more. Switch to Macro when shooting from a very
short distance.
☛
P153
･
There is a small time lag between taking a picture and pressing
o
or
C
. Do not move FOMA
terminal for period after pressing
o
or
C
. If you shoot a fast moving subject, the shot image might
slightly differ from the subject displayed on the screen when you press
o
or
C
.
･
If you shoot the quickly moving subjects in the Movie Camera mode, the image may be blurred.
･
When you direct the camera toward yourself by using the in-camera, the screen displays a mirror
image, but shot still images and videos are normal. For still images, setting
Auto save of Still Image
Setting to No can be used to save as mirror images.
･
When you use the camera from i-
α
ppli, the shot still images and the recorded videos are not saved in
Image (My Picture) or i-motion folder but saved in i-
α
ppli. However, some i-
α
ppli may be saved in i-mode
or Deco-Mail picture folder of Image (My Picture) or i-mode folder of i-motion . Shot images and videos
may be automatically sent to the server.
･
If the battery power goes out before saving a shot still image or video, it is not saved.
･
Because the camera consumes a lot of battery power, do not leave the camera activated long time or
do not keep shot images long time without being saved.
･
Some settings may require extra time to show an image on the shooting screen after you start the camera.
The copyright laws prohibit unauthorized use, such as reproduction, alteration and modification, of
photographs or videos and i-mode or Internet web site information obtained by using the FOMA terminal
without the permission of the relevant copyright holders except for personal use. Please refrain from
About the camera
Points of concern when shooting images
About copyrights and portrait rights
Befor
e
usi
n
g the cam
er
a