Foma D702i, Manual

Page: 307 / 405

305
Ne
twor
k Ser
v
ices
Using Multi Number
Multi Number
Up to 2 additional numbers ( Additional No1 and
Additional No2 ) can be used besides Basic
Number
.
1
m997
2 Perform the following operations
Making calls by selecting the number to be
notified to the other party
When making a call, you can select the number to
notify the other party from the submenu.
1 Enter a phone number
z m3
･
To make a call from the redial data:
r z
Highlight a party from the redial data
z
m3
･
To make a call from the received call history:
l z
Highlight a party from the received call
history
z m3
2 Select
Multi No.
field
z
Select the
number to notify the other party
3
m z
Select
Yes
INFORMATION
● If you pull out the UIM or replace it by another UIM,
the settings for Multi Number saved in FOMA
terminal (name, phone number, etc.) may be
deleted. In such a case, register them again.
● On the screen during the call receiving/dialing, the
names corresponding to the multi numbers ( Basic
Number / Additional No1 / Additional No2 ) are
displayed.
● In the redial data, the names corresponding to the
multi numbers ( Basic Number / Additional No1 /
Additional No2 ) notified during the dialing are
displayed.
● In the received call history, the names corresponding to
the received multiple numbers ( Basic Number /
Additional No1 / Additional No2 ) are displayed.
● If a call is made from the redial data, the number that
was dialed before is used.
● If a call is made from the received call history, the
number that was received before is used.
Item Operation procedure
Set Multi
Number You can set a number for making calls by
switching multi numbers in this setting.
1 z 1
to
3 z
Select Yes
Check setting
2 z
Select
Yes
Number
Setting
Basic
Number:
基本契約番号
/
My phone
number
Additional
No1:
付加番号 1 /
Not recorded
Additional
No2:
付加番号 2 /
Not recorded
Multi number
call: Disable
Set the phone number subscribed to Multi
Number.
a
3 z
Select each item to set
Name
:
Setting is available for each
Additional No1 / Additional No2 (up to
20 one-byte or 10 two-byte
characters). For
Basic Number
,
content of the setting of Own
Number is displayed.
Phone number
:
Set the subscribed phone number in
Additional No1 / Additional No2 .
Multi number call :
If set to
Enable
, you can make a call
by selecting the number to be
notified to the receiver from the
submenu when making a call.
b
Press
p
Incoming calls
melody setting
Individual
setting: OFF
Set the ring tone etc. for each
additional number.
a
4 z 1
or
2 z
Select each
item to set
Individual setting
:
Select whether to set the setting for
incoming calls individually.
･
When
OFF
is set, the following
items cannot be set.
Ring alert, Show image :
Setting procedure
☛
P63
b
Press
p
Default
Default
･
When
No specified
is
selected, number
set in Set Multi
Number
is used.
･
When Multi number
call is set to Disable
in
Number Setting
,
Multi numbers
cannot be selected.
Mul
ti Number