Foma D702i, Manual

Page: 58 / 405

56
Maki
ng
/R
ece
ivi
ng Cal
ls
INFORMATION
●
Even when Sub Address is ON , if “ ” is entered after entering a pause, timed pause or “#”, it is not recognized
as a sub-address delimiter and sent as tone signals (DTMF) containing “ ”.
Setting the alarm indicating reconnection of the interrupted call
Reconnect Alarm
Set an alarm that is heard at the time of reconnecting a voice call or videophone call interrupted
due to poor signal conditions in a tunnel or behind a building when signal conditions improve.
･
The other party hears no sound while signals are disrupted.
･
The time until the call is reconnected depends on line use or signal conditions. (The approximate
time is a maximum of 10 seconds.)
･
Note that the call is charged for the time until the call is reconnected (up to 10 seconds).
･
The call may be cut off before the alarm sounds depending on line use or signal conditions.
1
m8692 z 1
to
3
Suppressing ambient noises to improve the call quality
Noise Reduction
By suppressing ambient noises during a call, the other party can hear your voice clearly and you
can also hear the other party’s voice clearly.
･
It is recommended that this function usually be set to
ON
.
1
m8691
2
Press
1
･
To cancel the setting:
2
Talking without using hands in a car
In-car Handsfree
You can make and receive voice calls from a handsfree compatible device by connecting FOMA
terminal via USB to such device as the In-Car Hands-Free Kit 01 (optional) or car navigation system.
･
For operations of handsfree devices, refer to the instruction manual for each handsfree device. Note
that the FOMA In-Car Hands-Free Cable 01 (optional) is required to use the In-Car Hands-Free Kit
01 (optional).
INFORMATION
● The display and ring tone for incoming calls follow the FOMA terminal settings.
● If the setting is made to play sounds from a handsfree device, the ring tone sounds from a handsfree device
regardless of whether Silent Mode is on or of the ring tone settings on FOMA terminal.
● The operation during incoming calls in Public mode (Driving mode) follows the Public mode (Driving mode)
settings.
Default High alarm
Default ON
Reconnect Ala
rm