Foma D702i, Manual

Page: 311 / 405

309
D
a
ta Co
mm
unication
To authenticate FirstPass (user certificate), you must
install FirstPass PC software from the attached CD-
ROM and configure it. See “FirstPassManual” in the
CD-ROM for details.
To view “FirstPassManual” (PDF format), Adobe
Reader (version 6.0 or later recommended) is
required. If Adobe Reader is not installed in your PC,
you need to download the latest version from the
Adobe Systems Incorporated website (Communication
fee is separately required for downloading). See the
Adobe Systems Incorporated website for details.
■
Operating environment for the FirstPass PC
software
*1 May vary with the PC system configurations.
To perform data communication from FOMA terminal,
the following conditions must be satisfied.
･
The PCs which may use a FOMA USB cable
(optional).
･
You must be within the FOMA service area.
･
Packet communication requires an access point
that supports FOMA packet communications.
･
64K data communication requires an access point
that supports FOMA 64 kbps or ISDN synchronized
64 kbps data communication.
However, even when the above requirements are
satisfied, you may not be able to perform data
communication if base station traffic is heavy, or the
signal quality is poor.
Flow of setup for data communication
The setup work needed to connect FOMA
terminal to a PC to perform packet or 64K data
communication is as follows:
Access authentication when using PC browser
Item Requirements
PC PC/AT compatible computer
OS The Japanese version of
Windows 98SE, Me, 2000 or XP
Memory
requirements*
1
Windows 98SE, Me, 2000: 32MB
or more
Windows XP: 128MB or more
Hard disk
capacity*
1
10 MB or more free disk space
Browser Microsoft
®
Internet Explorer 5.5
and later version
For Windows XP, Microsoft
®
Internet Explorer 6.0 and later
version
Conditions of packet communication and
64K data communication
Glossary of Data communication
● Administrator privilege
A user level that provides complete access to all OS
functions in Windows XP and 2000. There must be
at least 1 user that has administrator privileges for
each PC. A user that has no administrator privileges
is not normally allowed to install/uninstall drivers and
software.
● APN (Access Point Name)
String to identify a provider or in-house LAN to
connect by packet communication. The APN for
mopera U is “mopera.net” and mopera is “mopera.ne.jp”.
● cid (Context Identifier)
The registration number when writing packet
communication dialup connection (APN) information
to FOMA terminal. 10 numbers from 1 to 10 are
available for FOMA terminal.
By default, “mopera.ne.jp” is registered in cid1, and
“mopera.net” in cid3.
● W-TCP
A TCP parameter designed to fully utilize TCP/IP
transmission capacity during packet communications in
a FOMA network. This communication setting is
essential to enable full use of FOMA terminal capability.
Install the FOMA PC configuration software
(Easy Setup)
Packet communication
setup
(Easy Setup)
64K data communication
setup
Execute communication
Set up communications without using FOMA PC
configuration software
Connect
Install the communication configuration file
Connect a PC to FOMA terminal
Check the communication configuration file
Flow
o
f s
e
tup
for d
a
ta com
m
un
icat
io
n