Foma D702i, Manual

Page: 226 / 405

224
Ma
il
2
Select
Direct input
z
Enter the address
(the other party’s phone number)
･
When the address is registered in the
phonebook, the registered name is displayed in
field.
･
To send to a party that uses an overseas
carrier other than DoCoMo, enter “+” (by
pressing
0
for over a second), the country
code and the party’s mobile phone number.
Omit the first 0 of the phone number. You can
also send by entering “010”, the country code
and the party’s mobile phone number (add
“010” when replying to a received SMS
message from overseas).
･
You can enter up to 26 characters in
field. However, up to 20 characters (21
characters if “+” is contained) can be sent as
address.
■ Searching the phonebook: Select
View
phonebook
z
Select a phonebook entry
z
Select a phone number
3 Select
z
Enter the message
･
When the font type is set to Japanese in SMS
Setting, up to 70 one-byte or two-byte
characters can be entered. A space is also
counted as a character in the message.
･
When the font type is set to English in SMS
Setting, up to 160 one-byte characters can be
entered. Alphanumerics and symbols (except
for
｀｡ 「」 、･ ゛
and
°
) can be sent. A one-
byte space is counted as a character in the
message.
･
Line feeds can be inserted in the message.
Press
#
to enter a line feed in 5-touch Input
Method (except in the one-byte and two-byte
numeric modes). A line feed is counted as a
character in the message. However, it is
replaced by a one-byte space on the receiver’s
terminal.
■
Inserting a signature:
m4
･
Signature must be registered beforehand.
4
Press
p
■
Saving SMS without sending:
m2
･
If neither the address nor message is
entered, the SMS cannot be saved.
･
You can edit and send the saved SMS.
☛
P200
INFORMATION
●
Depending on signal conditions, characters may not
be displayed correctly on the receiver’s terminal.
● Even if
Not notify
is set in Caller ID Notification, the
caller ID is sent to the receiver when SMS is sent.
● If you enter some symbols ( ｜＾ { } [ ] ˜ and
￥
)
when the font type is English, the number of
characters that can be sent is reduced. Therefore,
you may not be able to send the message even if
the number of characters is less than the limit. In this
case, reduce the number of characters and send it
again.
● When there is not enough available storage space,
or the maximum number of saved items is
exceeded, SMS cannot be composed. Delete
unnecessary i-mode Mail and/or SMS from
Unsent
messages
.
☛
P213
● Even when sending SMS has been completed, SMS
cannot be received normally on the model which
does not support SMS reception.
● The font type and whether to receive the delivered
report are set in SMS Setting beforehand. You can
also change the settings for the delivered report and
storage period in the SMS Center while composing
SMS.
● When transmission is completed correctly, SMS is
saved in
Outbox
folder of
Outbox
. However, when
the sent SMS matches the criteria specified in Sort
Criteria, it is saved in the specified folder. When
there is not enough available storage space, or the
maximum number of saved items is exceeded, the
oldest sent mail is overwritten. Be sure to protect
sent mail you want to keep.
● When transmission fails, an error message is
displayed and SMS is saved in
Unsent messages
folder of
Unsent messages
. You can edit and send the
SMS from
Unsent messages
folder.
☛
P200
● When you set the delivered report to
Request
and
send SMS, you will receive a delivered report that
notifies you that the message has been received by
the other party’s FOMA terminal. The delivered
report is saved in
Inbox
.
When SMS is received
Receive SMS
When there is incoming SMS, it is automatically
received and you are informed by the screen
display, ring tone, vibrator, and/or keys. The
received SMS is saved in Inbox .
･
The maximum number of received messages that
can be saved
☛
P36
Recei
ve SMS