Foma D702i, Manual

Page: 120 / 405

118
Sounds/Di
s
plays
/L
ig
hts
Settings
Setting the light for display and keys
Display Light Setting
1
m825
2
Select each item to set
3
Press
p
INFORMATION
● In the following cases, if you do not press any keys of FOMA terminal for approximately 90 seconds, the
display disappears and the power is in the state of saving (except for when shooting with the camera). If there
is any key operation or an incoming call, the display appears again.
･
When Turn light on is set to other than Always
･
During charging (when Turn light on is set to other than Always , and AC adapter connected is set to Terminal
settings )
● Even when Lighting method is set to Turn light ON , the display or keys do not light by pressing the keys while
Key Lock is on. However, if you press
f
, the display lights.
● Even when keys are set not to light, lighting is available in the following cases:
･
When activating Camera, taking pictures or auto timer is set.
･
When activating Movie Camera, taking pictures, pausing or auto timer is set.
･
When Sound Recorder is being activated, recording or pausing.
･
During updating software, downloading or rewriting
･
In case the lighting of each item is set to ON in Alert Lighting Setting and there are incoming calls or newly-
arrived information, etc.
Default Lighting method: Turn light ON Turn light on: 10 seconds Range: D Key
Brightness: Normal AC adapter connected: Terminal settings
Lighting method
：
Sets whether to turn the lighting on or off.
･
Setting Turn light ON maintains the lighting on the condition set in Turn light on ,
Range or Brightness .
･
Setting Turn light OFF does not turn the lighting on. Turn light on , Range and
Brightness cannot be set.
Turn light on ： Sets the lighting time.
Range
： Sets whether to light only the display or both the display and keys.
･ The keys to be lit when
D Key
is set are as follows:
m
,
p
,
t
,
a
,
n
,
f
,
q
(except for Enter key),
c
,
0
to
9
,
(
,
#
.
Brightness
：
Sets the brightness of the display to be lit.
AC adapter connected ：
Sets how to light the display when connecting to the optional AC adapter (desktop
holder) or to the DC adapter.
･
Setting Terminal settings lights according to the settings of the above items.
･
Setting
Always on
lights the display at
High
.
D
ispl
ay Light Set
ting