Foma D702i, Manual

Page: 140 / 405

138
Safe
ty Sett
ings
Rejecting/accepting incoming calls from the specified phone numbers
Reject/Accept Call
Reject/Accept Call is set for each phone number registered in the FOMA terminal phonebook.
･
To use this function, set Reject/Accept Call for each phone number and then enable Reject/Accept
Call in this setting. The items to be set and operations of rejecting/accepting incoming calls are as
follows.
*1 Even if a call is received from the set phone number, the call is disconnected without the ring tone
sounding and the other party hears busy signals.
･
This function is available only when the other party notifies the caller ID.
･
The rejected calls are recorded as missed calls in the received call history.
･
If the ringing time is set to 0 sec for Voice Mail Service or Call Forwarding Service, Voice Mail Service
or Call Forwarding Service is activated and the call is not recorded as a received call.
･
Combination with Caller ID Request Service and Anonymous Caller is recommended when used.
Specifying phone numbers to reject/accept
Reject/Accept Call is set for the phone numbers registered in the FOMA terminal phonebook.
･
Reject/Accept Call cannot be set for the phone numbers registered in the UIM phonebook.
1
Search the phonebook
z
Highlight the target
z m813
2
Enter the terminal security code
z
Select phone numbers
3
1
or
2
･
is indicated to the right side of the phonebook No. on the details screen of the phonebook data
for which Reject/Accept Call is set.
･
To cancel the setting:
3
INFORMATION
● On the FOMA terminal phonebook details screen, press
m
and select Set/Check → Settings → Accept/Reject
call .
● If the phone number with Reject/Accept Call set is changed or deleted, this function’s setting is canceled. In
that case, set Reject/Accept Call for the phone number changed or registered again.
Enabling Reject/Accept Call
･
The setting of this function applies to all phone numbers with Reject/Accept Call set.
･
Reject Call and Accept Call cannot be enabled at the same time.
1
m8671
2
Enter the terminal security code
z 2
or
3
･
To cancel the setting:
1
Reject/Accept
Call
Reject/Accept Call setting for each phone number
Accept call Reject call No setting
Accept call
Accept Reject*
1
Reject*
1
Reject call Accept Reject*
1
Accept
Cancel settings
Accept Accept Accept
Default Cancel settings
Rej
ect/
A
cce
p
t Cal
l