Foma D702i, Manual

Page: 272 / 405

270
Di
splaying/
Ed
iting/
Managing Dat
a
INFORMATION
●
Depending on the size of data to save, the maximum
number of items that can be saved/registered in
FOMA terminal may be fewer.
●
ToDo data (a list function data to manage business)
cannot be saved on D702i. When receiving all items
of ToDo data and schedule data at once from the
model other than D702i, only the schedule data is
saved. Note that when all items of only ToDo data
are received, all the schedule data registered in
D702i are deleted if you select to overwrite the
received data.
●
When the data received all at once are saved by
overwriting, the protected data in FOMA terminal are
also deleted.
●
When receiving the data unavailable on D702i, it
may be displayed as notes in INBOX . In this case,
saving as notes may not be available.
●
When receiving the PushTalk phonebook, it is
registered as the ordinary phonebook.
●
Mail data received from the device that can save
mail by the folder may be saved in the Message
i-
α
ppli folder. To check the saved mail data, select
the Message i-
α
ppli folder in which the data is
saved and press
m1
.
Activating infrared communication mode
Infrared Communication Mode
Activate i-
α
ppli by receiving the data to start
i- α ppli via infrared communication device having
the function of starting i-
α
ppli.
･
It is necessary to download the specified software
from sites, etc. beforehand.
･
In case i-
α
ppli is set not to start with the i-
α
ppli
To function via an external device, i-
α
ppli cannot
be activated.
1
m62212 z
Select
Yes
Receiving standby condition is activated.
2
Receive the data to start i-
α
ppli via
infrared communication device
i-
α
ppli is activated.
･
To cancel receiving data:
o
Using the infrared remote control
function
FOMA terminal can be used as an infrared
remote controller by downloading the i-
α
ppli for
infrared remote control.
･
Download the i- α ppli suited for the individual device.
･
If the preset i- α ppli G
ガイド番組表リモコン
(G-GUIDE TV Remote Controller) is activated,
FOMA terminal can be used as an infrared
remote controller for TV, etc.
☛
P271
･
This function is unavailable during Self Mode is
on or infrared communication is executed.
･
Communication may be influenced by the model
of the supported device used and ambient
luminance.
･
Some equipment cannot be operated even if it is
compatible with infrared remote control.
Perform remote control operation with the infrared
data port of FOMA terminal pointed at the infrared
receiver of the supported device used (operating
procedure differs depending on i-
α
ppli). Angle for
remote control is 15 degrees from the center and the
distance is approximately 4 m at the maximum.
However, the angle and distance allowed for the
operation differs depending on the type of devices to
operate and the level of brightness in the
environment.
Remote control operation
Infrared receiver
Infrared data port
Approx. 4 m
15 ° 15
°
In
frared C
o
mm
uni
c
a
tion
Mode