Foma D702i, Manual

Page: 358 / 405

356
A
ppendix/
Da
ta I
n
te
rc
ha
n
g
e/Tro
ubleshooti
n
g
When the reserved time arrives, the screen as shown
below is displayed and updating software is started
automatically. Before the reserved time, make sure
that the battery is fully charged and the handset is in
a location where radio waves reach and then show
the standby display.
When downloading is completed, rewriting software
is automatically started, followed by reload.
INFORMATION
● Note that updating software may not be activated
even though the reserved time arrives in case of
using the other functions. In case the reserved time
arrives while talking or receiving messages,
updating software starts after finishing talking or
receiving messages.
● If software update is executed when ON is set for
PIN1 Code On/Off, the PIN code entry screen will be
displayed at the time of automatic reload after
completion of software updating. You cannot make/
receive calls and operate communication functions if
the incorrect PIN1 code is entered.
● If any alarm is set for the same time, the alarm takes
precedence and the software update may not be
started.
Protecting FOMA terminal from hazardous
data
Virus Scan Function
For the data or program downloaded via a
website or received mail, this function detects
data that may cause troubles and then deletes it
or inhibits activation of applications in order to
protect FOMA terminal from viruses.
･
Pattern definition is used for checking. Update
pattern definition because it is updated whenever
a new trouble is detected.
･
Virus Scan Function is for preventing the data
that cause some problem to mobile phone from
invading when viewing websites or receiving mail.
Please note that if pattern definition
corresponding to specific troubles has not been
downloaded to the mobile phone or such pattern
definition does not exist,
this function cannot prevent the trouble from
happening.
･
Pattern definition is different depending on the
model of mobile phone. Please keep in mind that
DoCoMo may stop distributing the pattern
definition for the models that have been on the
market for 3 years or more.
･
When updating pattern definition, your private
information concerning the mobile phone (model,
serial number, etc.) is automatically sent to the
server (the server for the scan function managed
by DoCoMo). DoCoMo does not use the sent
information for purposes other than the scan
function.
Setting scan function
Scanning Setting
If this setting is set to ON , data or program is checked
automatically when it is displayed or executed.
1
m8373
2
1 z
Select
Yes
･
When the virus scan function, when set, has
detected data that may cause troubles, it displays
a message in one of 5 warning levels.
☛
P357
･
To cancel scan function:
2 z
Select Yes
Updating pattern definition automatically
Auto-update Setting
Updating is performed automatically to maintain the
latest pattern definition.
1
m8372
2
Select
Enable
z
Select
Yes
twice
3 Press
o
When the reserved time arrives
Update pattern definition first to keep the
pattern definition up-to-date.
･
To cancel the software
update:
f z
Select
Yes
Default ON
Default Enable
･
To cancel: Select
Disable
z
Select
Yes
Viru
s
Scan Function