Foma D702i, Manual

Page: 236 / 405

234
i-
α
ppli
1
d
(for over a second)
z
Select a folder
2
Highlight i-
α
ppli
z m7
3 Select each item to set
4 Press
p
･
When
Set i- α ppli display
is set to
Yes
, a
confirmation screen appears asking whether to
set i-
α
ppli as the standby display. Selecting
Yes
sets the i-
α
ppli standby display.
INFORMATION
●
When Set NW transmission are set to Yes , some
i-
α
ppli will automatically connect to the network for
communication.
●
When i- α ppli that connects to networks for
communication is set as the i- α ppli standby display
and Set NW transmission during i- α ppli display is set
to
Yes
, communication may automatically be carried
out depending on i- α ppli.
●
Note that if you set No for Set NW transmission ,
i-
α
ppli may not be started and timely information
such as stock prices or weather forecast may not be
provided by i-
α ppli.
●
If Yes is set for Use icons , information about icons for
unread mail, unread Message R/F, remaining
battery level, Silent Mode, and icons within service
area/outside service area may be sent to IPs
(Information service providers) through the Internet,
which may give the information to a third party.
Setting the lighting and vibrator during i-
α
ppli
running
Light/Vibrate Setting
･
The i- α ppli standby display light operation
depends on the settings in Display Light Setting
for the display.
･
While Public mode (Driving mode) is on, the light
does not operate while i-
α ppli is running even if
Use software setting is set.
1
m324 z 1
or
2
Allow the vibrator operation by i- α ppli.
･
While Public mode (Driving mode) is on, the
vibrator does not operate while i-
α
ppli is running
regardless of this setting.
1
m325 z 1
or
2
Starting another i-
α
ppli application from i-
α
ppli
You can start i-
α
ppli specified by some i-
α
ppli
applications, and enjoy it without returning to the
software list.
Set i -α ppli display
：
Used to set whether to set i-
α
ppli which
supports i-
α
ppli standby display as your
standby display.
･
Only one i-
α
ppli application can be set for
i-
α
ppli standby display.
Set NW transmission during i -α ppli display
：
Used to set whether to allow connection
while the i-
α
ppli standby display is
operating.
Set NW transmission ：
Used to set whether to allow connection
while i-
α
ppli is operating.
Use icons
：
Specifies whether to enable i-
α
ppli to use
icons for mail, Message R/F, remaining
battery level, Silent Mode and reception
level.
Start from browser
：
Used to set whether to start i-
α
ppli from
sites (i-
α
ppli To).
Start from mailer
：
Used to set whether to start i-
α
ppli from mail
(i-
α
ppli To).
Start from external
：
Used to set whether to start i-
α
ppli from
external devices (i-
α
ppli To).
Allow ring tone/image changes by software
*1
：
Specifies whether to allow i-
α
ppli to change
the settings of ring tones or images on the
screen such as the standby display. If
Yes
is
set, the ring tone and image of the standby
display may be changed automatically.
Confirm all changes
*1
：
Specifies whether i-
α
ppli displays a
confirmation screen each time the settings
of ring tones or images are changed.
Allow access to phonebook/call records by software
*1
：
Specifies whether to allow i-
α
ppli to refer to
the phonebook or call log. If Yes is set, the
phonebook or call log may be referred to
automatically.
*1 This setting is available only for i-
α
ppli DX.
Setting display light
Default Use phone setting
Use phone setting ：
The light is turned on according to the
settings in Display Light Setting for the
display.
☛
P118
Use software setting ：
The light comes on according to i-
α
ppli.
Setting vibrator
Default ON
St
ar
ting i
-
α
ppli