Foma D702i, Manual

Page: 294 / 405

292
Other Convenient
F
unct
ions
Checking the call duration
1
m841
･
If the total duration of calls was reset in the
past, the duration of the total calls made up to
the present after the reset is displayed.
■ Resetting the total calls duration:
a
p z
Enter the terminal security code
b
1
to
4 z
Select Yes
･
To return to the call duration screen:
p
Checking the call cost
1
m8441
･
If the total cost of calls was reset in the past,
the cost of the total calls made up to the
present after the reset is displayed.
■ Resetting the total call cost:
p z
Enter
PIN2 code
z
Select
Yes
INFORMATION
● No last charge information appears as
“
＊＊＊＊＊＊
YEN”.
●
When you switch from the voice call to the
videophone during a call, the last call cost shows the
total amount of them. During the operation to switch,
no call cost is required.
●
When the last or total duration of voice/videophone
call or data communication exceeds 9,999 hours 59
minutes 59 seconds, counting is restarted from 0
second.
● When FOMA terminal is turned off, the last call
duration is stored, but the last call cost is displayed as
“ ＊＊＊＊＊＊ YEN”.
● The duration of receiving a call and ringing time
cannot be counted.
● The call duration and call cost is not counted for
i-mode communication and packet communication.
For details of those usage fees, see “i-mode User’s
Manual” you received when you subscribed to i-mode.
Reset the call cost automatically
Reset Call Cost
Total call cost is set to zero automatically on the
1st day of each month.
1
m8444
2 Enter the terminal security code
z 1
･
To cancel:
2
3 Enter the PIN2 code
INFORMATION
● Even if the setting is
ON
, the setting is canceled
when the UIM different from the one used during the
setting is inserted and then turn the power on. It
doesn’t return to the previous setting even if the UIM
used when setting it is inserted again.
● When the setting is
ON
, the call cost will be reset if
you change the date and time to the next month in
Date and Time Setting.
● When the setting is
ON
, if the terminal is not turned on
or if you talking on the terminal at 0 o’clock of the first
day of the month, a reset will take place when you
turn the power on or end the call.
Setting to notify the limit of call cost
Call Cost Limit
Set the maximum limit of call cost and, when the
total call cost exceeds the set amount, it is
notified with an alarm or icon.
･
The amount shown in Call Cost Limit is only an
estimate and should not be regarded as the
actual amount for billing.
Last call
：
The duration of the last voice/videophone
call or of the last data communication
Total voice calls
：
The total duration of voice calls made
Total videophone calls
：
The total duration of videophone calls made
Total data sessions
：
The total duration of data communication
established
Last call cost: Voice
：
The cost of the last voice call
Last call cost: VP
：
The cost of the last videophone call
Last call cost: Data
：
The cost of the last data communication
Total calls cost
：
The total cost of voice/videophone call and
data communication
Reset: day & time ：
The date and time of the last reset
Default OFF
Default Alert: OFF
Reset
Cal
l Cost