Foma D702i, Manual

Page: 282 / 405

280
Other Convenient
F
unct
ions
･
Pressing
f
while the alarm is sounding finishes
the alarm sound and the display before sounding
reappears.
･
If the terminal is left unoperated for about 1 minute
or a key other than
f
is pressed, the alarm
sound stops, and the terminal keeps ringing for 1
minute followed by a 4-minute silent period
repeatedly for 30 minutes (snooze operation).
If video/i-motion is set, the first image is displayed.
If an incoming voice call or videophone call is
received while the alarm sounds, snooze operation
also starts in the same way.
･
If some operation such as a call is going on at the
set time, the terminal operates as follows:
･
During a call, the warning sound but the alarm
occurs and the alarm screen appears. In addition,
the vibrator does not operate even if FOMA
terminal has been set to notify a call by vibration.
During On-hold, the above operation is available
after canceling On-hold.
･
When power is off, neither the power is turned on
nor the alarm sounds. To sound the alarm, set
Alarm Auto Power ON to
ON
.
･
When the set time arrives during data
transmission/reception (except packet
communications) or while making, receiving or
disconnecting a call, the alarm operates after
those operation ends.
INFORMATION
● When multiple alarms are set for the same time, the
alarm set for the smallest item number in the alarm
list is activated.
● When an alarm and a schedule alarm are set for the
same time, the screen that notifies the alarm
appears at first, followed by the snooze operation
and then the schedule alarm is notified. Even if the
schedule alarm screen is finished, the snooze
operation of the alarm is continued.
● When a Chara-den image is displayed at the set
time, the alarm may sound a few seconds late.
● When All Lock or PIM Lock is activated, the alarm
does not sound.
Setting to turn power on automatically at the
time specified for the alarm
Alarm Auto Power ON
Set to automatically turn the power on and sound
an alarm if the power is off when the date and
time specified by Scheduler or Alarm Clock
arrives.
1
m855
2 Press
1
･
To set not to turn the power on automatically:
2
INFORMATION
● Set this setting to OFF in areas where mobile phone
use is prohibited, such as in hospitals, medical
facilities and airplanes.
● If Alarm Auto Power ON and PIN1 Code ON/OFF
have been set to ON , the alarm sounds before
displaying the PIN1 code entry screen when the
power is turned on at the set time for an alarm or
schedule. When pressing
f
to end the alarm, the
PIN1 code entry screen is displayed. At this time, as
the alarm, the melody preinstalled by default (
ア
ラーム・アナログ時計 (Alarm ・ analog clock) is for
the alarm, アラーム・女性ボイス (Alarm ・ Female
voice) is for the schedule alarm) sounds even when
the downloaded melody or i-motion is set for the
alarm sound.
Menu 71
Managing schedules
Scheduler
Save various schedules. You will be notified of it
with the display and/or alarm sound at the set
time.
Displaying the calendar
The calendar screen allows displaying schedules.
1
p
(for over a second)
･
For a day with multiple schedules set, the item
icon for the plan schedule planned for the
earliest hour is indicated. Even if the time of the
item set at the earliest time of the day is
passed, the item icon set next is not displayed.
Default OFF
Cursor
Item icon
The calendar screen
appears. Current day is
displayed in pink,
Saturdays are
displayed in blue, and
Sundays and national
holidays in red. (The
displayed color
depends on the setting
of Color Scheme).
Ala
rm
Auto Power ON