Foma D702i, Manual

Page: 312 / 405

310
D
a
ta Co
mm
unication
Communication configuration file (driver)
Install the communication configuration file on a PC
from the attached CD-ROM, before connecting
FOMA terminal to a PC to perform data
communication in the communication mode.
FOMA PC configuration software
When the FOMA PC configuration software (found on
the CD-ROM) is installed on a PC, a number of
settings required for data communication via
connection between FOMA terminal and PC can be
made from the PC by simple operation.
Checking operating environment
Use the communication configuration file and the
FOMA PC configuration software in the following
operating environments:
*1 USB port (conform to USB specification 1.1/2.0) is
required.
INFORMATION
● Note that utilization may not be possible in certain
operating environments. Furthermore, operation will
not be guaranteed in an environment other than that
described above and DoCoMo assumes no
responsibility for operation under such conditions.
AT command
AT commands are commands for setting FOMA
terminal functions using a PC.
FOMA terminals comply with AT commands and
support some extended commands and
proprietary AT commands.
For details of AT command, see “Manual for Data
Communication” in CD-ROM provided.
Item Requirements
PC*
1
PC/AT compatible computer
OS The Japanese version of
Windows 98, Me, 2000, XP
Memory
requirements Windows 98, Me: 32MB or more
Windows 2000: 64MB or more
Windows XP: 128MB or more
Hard disk capacity 5 MB or more free disk space
AT comm
and