Foma D702i Manual Download Page 180

Page: 180 / 405

178

de
/i-

tion

Using Message Service

When Message R/F is received

Receive Message R/F

When Message R/F is received, you are informed

by the screen display, ring alert, vibrator, and/or

keys. The received Message R/F is saved in

FOMA terminal.

･

The maximum number of Message R/Fs that can

be saved

☛

P36

A Message R/F is received

and or flash and

Receiving messages...

displayed.

When reception is completed, the Message R/F

ring alert sounds, the keys light/flash, and the

reception result screen is displayed.

･

Press

on the receiving screen to stop

reception.

･

If you do not press any key for about 15 seconds

after the reception result screen is displayed or

until the ring tone stops sounding, the display

returns to the screen displayed prior to

reception. When Message R/F to which Auto-

display is set is received, the contents of unread

Message R/F are displayed before the display

returns to the previous screen.

･

To return to the previous screen immediately:

INFORMATION

●

When there is not enough available storage space

or the maximum number of saved items is

exceeded, the received Message R/Fs except

unread ones are overwritten, oldest first. Be sure to

protect Message R/F you want to keep.

☛

P180

･

If the message cannot be overwritten because the

storage space is filled with unread Message R/F and

protected Message R/F, Message R/F reception is

stopped and (red) or (red) is indicated on the

screen (

☛

P27). To receive new messages, display

the contents of unread Message R/Fs (

☛

P179),

delete unnecessary Message R/Fs (

☛

P180) or

cancel message protection (

☛

P180) beforehand.

●

The receiving screen and reception result screen are

not displayed depending on the setting for Display

Priority.

☛

P220

●

Incoming Message R/F is stored in the i-mode

Center in the following cases:

･

When the power is off

･

During a videophone call

･

In Self Mode

･

When reception fails

･

While being out of service area

･

While receiving SMS

･

During infrared communication

･

While connecting to the FirstPass center

･

When the storage space is filled with unread

Message R/F and protected Message R/F

●

When FOMA terminal receives Message R/F, the

Message R/F in the i-mode Center is deleted.

●

If there is unreceived Message R/F in the i-mode

Center, ,

(

☛

P27) is indicated.

However, the icon may not be indicated even when

there are Message R/Fs in the i-mode Center. When

the maximum number of Message R/Fs that can be

stored in the i-mode Center (

☛

P165) is reached, the

icon changes to

(

☛

P27).

Displaying newly-received Message R/F

on the reception result

screen

Flashes

Reception completed

: Unread Message R

exists.

: Unread Message F

exists.

Number of received
Message R/Fs

When reception fails, “x”
is indicated after

Message R

Message F

To receive unreceived
messages, perform
Check i-mode Message.

Reception result
scrolls.

Receiving screen

Reception result screen

Flashes

･

The received

Message R is saved

Message R

and the

received Message F

is saved in

Message

Re
cei

ve Messa

R/
F

Summary of Contents for D702i






















































































































































































































































































































































































































Search results

Summary of Contents for D702i

Reviews:

Related manuals for D702i

Brands by name

Popular brands

Foma D702i, Manual

Search results

Summary of Contents for D702i

Reviews:

Related manuals for D702i

Brands by name

Popular brands