Foma D702i Manual Download Page 41

Page: 41 / 405

Before Us

ing D7

02i

Attaching/removing the battery pack

･

Turn the power off before attaching or removing the battery pack.

･

Be careful not to touch the camera lens.

WORLD WING

WORLD WING is the DoCoMo FOMA international roaming service. By taking out the UIM (green) from the

FOMA terminal you normally use and inserting it into FOMA terminal supporting the service or an overseas

mobile phone (W-CDMA or GSM handset), you can make/receive calls in foreign countries with your own

mobile phone number.

You can use WORLD WING without subscription.

●

If you have not contracted WORLD WING for the FOMA service in the contract before August 31, 2005, a

separate subscription is required to use WORLD WING.

●

This service cannot be used with some billing plans.

Attaching the battery pack

Remove the rear cover.

While pressing the top of the rear cover with your

thumb, slide it in the direction of the arrow until it is

removed.

With the surface with DoCoMo logo and the recycle

mark of the battery pack facing up, insert the battery

pack into FOMA terminal at the angle as shown in

the figure.

Do not force the battery pack terminals into FOMA

terminal. Doing so could damage these terminals or

the body connector.

Push the battery pack in.

Place the rear cover plate so that it can slide

about 5 mm on FOMA terminal.

Slide the rear cover.

Failure to follow the correct procedure could damage

the rear cover.

Removing the battery pack

Remove the rear cover.

Lift the projection part of the battery pack while

pushing it toward external connection terminals

to remove the battery pack.

Press here.

At
tachi

movi

ng t

bat

ter
y

Next

Summary of Contents for D702i






















































































































































































































































































































































































































Search results

Summary of Contents for D702i

Reviews:

Related manuals for D702i

Brands by name

Popular brands

Foma D702i, Manual

Search results

Summary of Contents for D702i

Reviews:

Related manuals for D702i

Brands by name

Popular brands