140
Cleaning
2. In
temperature
enter the desired temperature of the cleaning
water.
3. In
detergent
enter the desired detergent quantity.
4. If the teat must be cleaned, too, select
yes
in the line
clean
teat
. In that case, the rinsing water is not drained via the mixer
draining valve, if available, but via the teat.
9.2
Mixer
The mixer can be cleaned automatically (time-controlled) or
manually, with or without detergent.
Temperature
Detergent quantity
Default value:
45 °C
0 ml/L
Range:
10 to 50 °C
0 ml/L to 25 ml/L
Note:
The temperature of the cleaning water and the de-
tergent quantity apply to all cleaning processes! Anyhow
they can be changed at any time.
Note:
The detergent is dispensed only if the mixer drain-
ing valve is available.
Note
: The mixer is automatically cleaned twice a day, at
7:00 a.m. and at 10 p.m. Max. four cleaning cycles can
be carried out. The default values of the cleaning times
can be changed at any time.
Summary of Contents for TAK5-CH1-25
