Foerster TAK5-CH1-25, Instruction Manual

Page: 79 / 226

Device data 79
5.6.2 Mixer emptying
5.6.2.1 Mixer emptying according to time
The automatic feeder allows you to select the time (minutes)
after which the remaining portion in the mixer jar should be
drained off. The emptying process is possibly followed by a
draining process (see the following chapter).
1. > device data > mixer > drain
2. In drain enter the desired period of time (minutes).
5.6.2.2 Draining mode
The draining mode helps to reduce the risk of suction hose
freezing in winter. If the draining mode is active, after mixer emp-
tying in order to pump off a remaining portion for all the available
stations, the box valves will open for one minute to facilitate
draining of the remaining liquid from the hoses. If the station is
equipped with peristaltic pumps, these pumps start running for
one minute.
1. > device data > mixer > draining mode
2. Activate resp. deactivate the draining mode carrying the
same name. The draining mode is deactivated as a standard.
5.6.3 OFF delay of the mixer
Via the menu OFF delay you can change the runtime of the
mixer. Whether and how long the mixer should continue to run,
depends on the solubility of the milk powder.
1. > device data > mixer > OFF delay
2. In OFF delay select the desired value.
mixer
draining mode: no
drain: [30]min
OFF delay: 3 sec
Default value: 30 min
Allowed range: 0 min (= deactivated emptying),
5 to 120 min
mixer
draining mode: [ yes]
drain: 30 min
OFF delay: 3 sec
mixer
...
OFF delay: 3 sec