Foerster TAK5-CH1-25 Instruction Manual Download Page 115

Page: 115 / 226

Feeding

115

Four plans each are available: feeding plan A, B, C or D, concen-

tration plan A, B, C or D, etc.

You can allocate an animal either to group A, B, C or D. Group

A is fed according to the feeding plan A and group B according

to the feeding plan B, etc. Those animals having been allocated

to different feeding groups can nevertheless be housed in the

same pen or be fed at the same station.

Below you will find an example of a feeding plan

As a standard, each feeding plan is subdivided into four periods

(P 1 - P 4). However, a fifth period can be added to the feeding

plan, if required.

The registration day corresponds to the first day of the feeding

plan.

If at start-up you have „reset“ (new installation) the device data

of the automatic feeder, the machine will operate with default val-

ues. The default values are based on experience and can be

changed or adapted to the needs of each individual animal at

any time.

You will find the default feeding plans in the annex of this instruc-

tion manual.

8.3.1

Changing the feeding plans

feeding

plans

feed > quantity

Summary of Contents for TAK5-CH1-25



































































































































































































































Search results

Summary of Contents for TAK5-CH1-25

Reviews:

Brands by name

Popular brands

Foerster TAK5-CH1-25, Instruction Manual

Search results

Summary of Contents for TAK5-CH1-25

Reviews:

Brands by name

Popular brands