Foerster TAK5-CH1-25, Instruction Manual

Page: 74 / 226

74 Device data
If the ad libitum-mode is active, in the following lines you can
select the feed concentration , the milk ratio and additive
dispense .
5.4 Parallel mode
If the automatic feeder is operating in the parallel mode, one or
more stations are supplied by peristaltic pumps. To ensure a
high dosing accuracy, these pumps are automatically calibrated
once a day.
1. > device data > parallel mode
2. In autom. cal. select whether such an automatic calibration
has to take place.
3. In cal. time select the time of automatic calibration. The de-
fault time is midnight.
5.5 Station parameters
5.5.1 Feeding station
In feed you can define the following parameters for each station:
•
Draining time
•
Turn-on delay
•
Turn-off delay
Note: these settings are taken into account for the prep-
aration of all feed portions.
device data
...
parallel mode
...
parallel mode
autom. cal.: [ yes]
cal. time: 00:00
Note : If the calibration value determined via the auto-
matic calibration deviates considerably from the value
determined until now, the warning autom. cal. will be
displayed (see 12.2.15 Automatic calibration,
page 187 ).
<station 1>
drain. time: [16]sec
t. on delay: 0.2 sec
t. off delay: 0.2 sec
pump start: 0.7 sec
pump stop: 0.7 sec
max. speed: 70 %