Foerster TAK5-CH1-25 Instruction Manual Download Page 73

Page: 73 / 226

Device data

5.3

Restricted mode/ad libitum mode

The automatic feeder operates as a standard in the restricted

mode but it can also commute to the ad libitum mode.

Restricted mode

In the restricted mode the automatic feeder operates with animal

identification, i.e. the animals are fed animal-specifically and in a

restricted way.

Ad libitum mode

In the ad libitum mode the automatic feeder operates without ani-

mal identification. In the feeding mode a portion is prepared only

when the bar electrode in the mixer jar is free (the mixer is

empty). The box valves are constantly open.

device data

ad libitum mode

2. In

activated

select the desired setting.

Note:

The settings in the setup of the automatic feeder are

not

changed when carrying out „new installation“.

device data

portion

milk values

ad libitum mode

...

ad libitum mode

activated: [ no]

ad libitum mode

activated: [ yes]

conc.: 135 g/l

milk ratio: 100 %

add. 1: 0 g/l

add. 2: 0 g/l

Note:

If the automatic feeder operates in the ad libitum

mode for a long period of time, the box valves will heat

up considerably as they are always open. Therefore, slip

the suction hoses directly onto the nozzles of the mixer

jar and remove the female power connectors from the

box valves.

In the ad libitum mode the animals are not identified.

Therefore, the function

automatic read in

of the trans-

mitter numbers is

not

active.

Summary of Contents for TAK5-CH1-25



































































































































































































































Search results

Summary of Contents for TAK5-CH1-25

Reviews:

Brands by name

Popular brands

Foerster TAK5-CH1-25, Instruction Manual

Search results

Summary of Contents for TAK5-CH1-25

Reviews:

Brands by name

Popular brands