Foerster TAK5-CH1-25, Instruction Manual

Page: 180 / 226

180 Failures and warnings
1. Check whether the supply electrode is grounded (status =
covered), when you press each in milk start? , water HE
start? , water bo. start? .
2. In mixer: empty? press .
3. If the reason for failure has been removed, in delete warn-
ing? press .
12.1.14 ID-chip
The automatic feeder is equipped with an electronic rating plate
(ID-chip) indicating the device number and further important
information about how to operate the automatic feeder. If the ID-
chip is defective, you must replace it within 30 days, otherwise
feeding will be broken off until the defective ID-chip has been
replaced.
12.1.15 Station/draining valve
If a station valve or the mixer draining valve is untight, during the
cleaning process water will get lost.
> Check all the station valves as well as the mixer draining
valve for tightness . Clean the valves, if necessary. Foreign
material may have been deposited, thus preventing the
valves from closing completely.
> If even cleaning does not bring any results, the corresponding
valve must be repaired or replaced.
> The bar electrode is possibly defective and must be replaced.
In water bo. start? press and check whether the elec-
trode signals „covered“.
> If the reason for failure has been removed, in delete failure?
press .
supply electrode
state: free
milk: start?
water HE: start?
water bo.: start?
mixer: empty?
delete failure?
failure
ID-chip missing
failure
station/drain valve
station/drain valve
bar el.: free
water bo.: start?
mixer: start?
mixer: drain?