Foerster TAK5-CH1-25 Instruction Manual Download Page 11

Page: 11 / 226

Introduction

•

milk starting to turn sour if it is heated before being fed. This

milk may curdle by heating, thus occluding the stainless steel

coil of the heat exchanger.

1.3

Safety signs

1.4

Information signs on the automatic feeder

Below you will find the description of each individual information

sign located in or on the automatic feeder.

Danger!

Hazardous voltage! Electric shock

hazard!

Do not touch any live parts, otherwise current

will flow through your body. This may cause

severe physical injury.

Turn off and lock out power before carrying out

any kind of operations on the labeled parts.

Warning!

Automatic start-up!

Keep hands clear from the crushing danger area as long as

parts can move. For cleaning, use the tools contained in the

scope of delivery.

Reset the safety temperature limiter

Guidelines for resetting the safety temperature

limiter.

Remove the metal covering.

Push the red Reset button. Follow the instruc-

tions in this manual.

Summary of Contents for TAK5-CH1-25



































































































































































































































Search results

Summary of Contents for TAK5-CH1-25

Reviews:

Related manuals for TAK5-CH1-25

Brands by name

Popular brands

Foerster TAK5-CH1-25, Instruction Manual

Search results

Summary of Contents for TAK5-CH1-25

Reviews:

Related manuals for TAK5-CH1-25

Brands by name

Popular brands