Foerster TAK5-CH1-25, Instruction Manual, Page: 40 / 226

40 Start-up
a short and flexible copper conductor (minimum cross section: 4
mm²).
Lightning protection
As it is technically impossible to protect such an installation
against lightning stroke separately, it is to the owner to install an
adequate lightning protection (e.g. a lightning protection system
for the entire building). We recommend to conclude a lightning
protection insurance.
3.2 Locating the automatic feeder
> Place the automatic feeder ideally in a dry location, if possible
separate from the animal area, e. g. in the fodder storage or
the milk room.
> Protect the automatic feeder against dirt and flies, e.g. by
means of the large fly protection door.
> Be sure to protect the automatic feeder against frost, e.g. by
means of the equipment against frost.
3.3 Mounting the protective grating of the powder hopper extension
The protective grating of the powder hopper extension prevents
injuries caused by rotating tools which are located inside the
powder hopper. Injuries may occur e.g. when filling the milk pow-
der into the powder hopper.
1 Opening on the powder hopper extension to screw in a self-cutting
screw
1