Foerster TAK5-CH1-25 Instruction Manual Download Page 144

Page: 144 / 226

144

Cleaning

5. Make the suction hoses ready for the cleaning process:

5.1

Remove the suction hoses (4) + (5) from the hose noz-

zles on the teats and the milk hose from the milk supply

of the automatic feeder.

5.2

Slip the suction hoses on the plastic hose nozzles of the

cleaning adaptor.

5.3

Place the cleaning adaptor next to the discharge.

Press

to continue pre-cleaning.

When pre-cleaning has been completed, the message on the

right will be displayed.

7. Connect the cleaning adaptor to the milk supply.

8. Press

to start main cleaning. The display shows the time

left till the end of main cleaning.

9. When main cleaning has been completed, the message on

the right will be displayed. Remove the cleaning adaptor and

place it next to the discharge.

10.Press

to start rinsing.

1 Hose nozzle

4 Suction hose (first station)

2 Cleaning adaptor

5 Suction hose (second station)

3 Rubber closing cap

6 Coupling for milk supply

Note

: Do

not

connect the cleaning adaptor to the milk

supply

yet

hoses

connected?

hoses

disconnected?

Summary of Contents for TAK5-CH1-25



































































































































































































































Search results

Summary of Contents for TAK5-CH1-25

Reviews:

Related manuals for TAK5-CH1-25

Brands by name

Popular brands

Foerster TAK5-CH1-25, Instruction Manual

Search results

Summary of Contents for TAK5-CH1-25

Reviews:

Related manuals for TAK5-CH1-25

Brands by name

Popular brands