Festo CMMD-AS series, Description

Page: 223 / 246

A Diagnostic messages
Festo – GDCP-CMMS/D-FW-EN – 1404NH – English 223
Error group 22 PROFIBUS
No. Code Message Reaction
22-0
7500h
Error in PROFIBUS initialisation
PS off
Cause Fieldbus interface defective.
Action • Please contact Technical Support.
22-2
7500h
PROFIBUS communication error
configurable
Cause – Faulty initialisation of the Profibus interface.
– Interface defective.
Action • Check the set slave address.
• Check bus termination.
• Check wiring.
Error group 25 Firmware
No. Code Message Reaction
25-1 6081 h Incorrect firmware PS off
Cause Motor controller and firmware are not compatible.
Action • Update the firmware.
Error group 26 Data flash
No. Code Message Reaction
26-1
5581h
Checksum error
PS off
Cause Checksum error of a parameter set.
Action • Load factory setting.
• If the error is still present, the hardware may be defective.
Error group 29 SD card
No. Code Message Reaction
29-0 7680h No SD configurable
Cause An attempt was made to access a missing SD card.
Action Check:
• whether the SD card is inserted properly,
• whether the SD card is formatted,
• whether a compatible SD card is plugged in.
29-1 7681h SD initialization error configurable
Cause – Error during initialization.
– Communication not possible.
Action • Plug card back in.
• Check card (file format FAT 16).
• If necessary, format card.