1
Safety and requirements for product use
Festo – GDCP-CMMS/D-FW-EN – 1404NH – English
15
1.2
Requirements for product use
•
Make this documentation available to the design engineer, installer and personnel responsible for
commissioning the machine or system in which this product is used.
•
Make sure that the specifications of the documentation are always complied with. Also consider the
documentation for the other components and modules.
•
Take into consideration the legal regulations applicable for the destination as well as:
–
Regulations and standards,
–
Regulations of the testing organisations and insurers,
–
National specifications.
1.2.1
Transport and storage conditions
•
Protect the product during transport and storage from impermissible burdens, such as:
–
Mechanical loads
–
Impermissible temperatures
–
Moisture
–
Aggressive atmosphere
•
Store and transport the product in its original packaging. The original packaging offers sufficient
protection from typical stresses.
1.2.2
Technical requirements
For correct and safe use of the product:
•
Comply with the connection and ambient conditions of the product specified in the technical data
“Mounting and installation” description, GDCP-CMMS-AS-G2-HW-…/GDCP-CMMD-AS-HW-…/
GDCP-CMMS-ST-G2-HW-…, Appendix A.1, and of all connected components. Compliance with the
limit values and load limits permits operation of the product in compliance with the relevant safety
regulations.
•
Observe the instructions and warnings in this documentation.
1.2.3
Qualification of trained personnel
The product may only be placed in operation by a qualified electrotechnician who is familiar with:
–
Installation and operation of electrical control systems,
–
The applicable regulations for operating safety-engineered systems,
–
The applicable regulations for accident protection and operational reliability, and
–
The documentation for the product.
1.2.4
Range of application and certifications
The motor controller with integrated STO safety function is a safety-related part of the control systems.
The motor controller carries the CE marking; for standards and test values
“Mounting and installation” description, GDCP-CMMS-AS-G2-HW-…/GDCP-CMMD-AS-HW-…/
GDCP-CMMS-ST-G2-HW-…, Appendix A.1.
The product-relevant EU directives can be found in the declaration of conformity.
Certificates and the declaration of conformity for this product
www.festo.com/sp
Summary of Contents for CMMD-AS series
Page 245: ......
