EDNord QMS 4060 Manual Download Page 228

Page: 228 / 340

Status Messages

QMS 4060 Print System Operation

9-6

FEED PATH JAM

Paper has jammed in
the feed path.

Check areas 2 & 3
inside the front door.
See chapter 4, “Printer
Jams,”

FRONT DOOR OPEN

The front door is open
or not completely
closed

Close the front door
until it latches. Check
that the maintenance
items inside are in
place.

FUSER INTERLOCK

The fuser was not
properly seated after
the last maintenance.

Push the fuser in while
turning the decurler
roller knob clockwise
and secure with
thumbscrew. Refer to
chapter 2,
“Consumables,” for
details.

IDLE

The printer is on line,
but no jobs are in
process.

No action necessary.

INITIALIZING

The printer is getting
ready to go on line.

No action necessary.

INPUT IDLE

PRINTING

The printer is on line
and printing jobs
already in the queue.
No new jobs are
arriving at the
communication
interfaces.

No action necessary.

INPUTBIN BIN JAM

Paper has jammed
while being pulled from
the specified input bin.

Clear jam from the
specified input bin.
See chapter 4, “Printer
Jams,”

This status message...

means...

do this...

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS 4060





















































































































































































































































































































































Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands

EDNord QMS 4060, Manual

Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands