EDNord QMS 4060, Manual

Page: 148 / 340

Starting a
Remote
Console
Session
QMS 4060 Print System Operation 6-8
n
In a Phase V environment, if you used the local name space
configuration when setting up the printer originally, check the
text file sys$sysroot:[sysexe]decnet_loc_node_definitions.txt.
n
In a Phase V environment, if you used the distributed name
space configuration when setting up the printer originally,
check with your system administrator for the nodename.
You can view the settings of only one QMS printer at a time. If you
have other printers connected to the client, you must exit from PS
Executive before viewing others.
Once you enter the nodename, the following PS Executive Main
menu appears:
MAIN MENU
Start Remote Console Session
Show Printer Counters
Show Printer Location
Exit PS Executive
Use arrow keys and <RETURN> to select
» Note: If you accidentally enter an invalid nodename or one that is
valid but not for a printer (such as another VAX node), various
messages or prompts appear depending on what was entered.
Until you enter a correct nodename, you cannot open PS
Executive to use Remote Console.
4 Select Start Remote Console Session at the top of the
screen.
A Remote Console Session screen similar to the following
appears:
REMOTE CONSOLE SESSION
QMS Console Manager
QMS 4060 Print System->QMS 4060 Print System->Idle
QMS 4060 Print System->
When the connection to the printer is complete, a prompt with
your printer name and the current printer status, such as
Idle
or
Spooling,
appears. In this example, a QMS 4060 Print System
is used. The status message,
Idle
, is the same as the display in
the printer’s message window.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500