EDNord QMS 4060, Manual

Page: 20 / 340

Printer Basics
QMS 4060 Print System Operation 1-10
Printer Component Function
Fuser Lock Knob Locks the fuser unit in place.
Cleaning Roller Collects excess toner from the drum.
Fuser Unit Applies heat and pressure to melt the toner to
the paper.
Drum Unit Lock Knob Locks the drum unit in place.
Precharger Cleaner Used to clean the precharger for print quality.
Drum Unit Contains the precharger, cleaner, and
photosensitive drum.
Knob 2 Used for clearing jams as paper exits the paper
trays and enters the drum area.
Lever b1 Used to lock internal components in the paper
path.
Knob 1 Used for clearing jams as paper exits the paper
trays and enters the drum area.
Transfer Assembly Guide Transfers the print image from the drum to the
paper.
Lever 6 Used for clearing jams.
Handle 3 Used to hold the transfer assembly guide in
place.
Duplex Roller Knob Used to clear jams in the duplex area.
Duplex Unit For two-sided printing.
Lever 4 Releases tension on paper in the fuser area to
clear jams.
Decurler Lever Access to jammed paper in the decurler area.
Decurler Roller Knob Used to clear jams in the decurler area.
Lever 5 Access to jammed paper in the reverser area.
Cleaning Brush Used to clean the transfer assembly.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500