EDNord QMS 4060, Manual

Page: 128 / 340

Introduction
QMS 4060 Print System Operation 5-2
Introduction
This chapter describes changing print resolution, using high-resolu-
tion while duplexing, chaining paper trays, collating output, printing a
status page, cancelling a print job, and ending a print job.
High-Resolution Printing
The QMS 4060 Print System supports two print resolutions: 300x300,
and 600x600 dpi (dots per inch). For printed pages that don’t require
optimum print quality, such as rough drafts, memos, or text-only pages
without graphics (dependent on shading details), you may choose to
set the printer at 300 dpi. For pages that demand high-quality output,
especially those containing detailed graphics or varying background
shades, you’ll want to set the printer resolution to 600 dpi.
Setting the Resolution
You can set the default resolution of your printer through the Adminis-
tration/Engine/Def Resolution menu.
Your printer offers greatly improved print quality at 600 dpi. To take
best advantage of these higher resolutions use
n
The resident PostScript and PCL 5e typefaces
n
The software printer drivers designed for your printer
» Note: Whenever possible, set the print resolution through your
application. If the print resolution can’t be set through the application,
set it through the printer control panel, through the printer driver, or
through a QMS Document Option Command.
Menu Administration/Engine/Def Resolution
Choices 300 dpi—300x300 dpi resolution.
600 dpi—600x600 dpi resolution.
Default 600 dpi
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500