EDNord QMS 4060, Manual

Page: 176 / 340

Console
Commands
QMS 4060 Print System Operation 6-36
Renaming a File
Command rename (mv)
Purpose Change the current name of a file to a new name. If the
new name specifies a different directory, the file is
moved to that directory.
Mode admin
Notes The new directory must already exist. If it does not exist
you will receive a
file name is invalid
error
message, in which case you need to create the
directory using FTP.
The command works on files only. Directories cannot
be renamed with this command.
You may use the following shortcut to copy all files from
one directory to another:
cp source_directory/* destination
_directory
The file to be renamed must be in one of the following
directories: FLP0: or DSK
# :/USR/ xxxxxxxx directory. ( #
represents a disk in the range of 1 to 7 and xxxxxxxx
represents a user created subdirectory.) This command
displays only if a disk drive is available on the printer
you are using.
Example Rename file acc.bak to acc.old in the same directory:
admin->mv acc.bak acc.old
↵
Rename file acc.bak to acc.old and move it to the
parent directory:
admin->mv acc.bak ../acc.old
↵
Move the file acc.bak to subdirectory backup without
changing its name:
admin->mv acc.bak backup/acc.bak
↵
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500