EDNord QMS 4060 Manual Download Page 227

Page: 227 / 340

Status Messages

9-5

Troubleshooting Printer Problems

CLOSE ENGINE DOOR(S)

One or more of the
front or side covers is
open and must be
closed.

Close the front or side
covers.

PURGE DEVELOPER

The developer is
beginning its discharge
cycle.

Wait for the cycle to
complete.

REPLACE DEVELOPER

The developer has
reached its useful life
and should be
replaced.

Replace the developer.
Refer to chapter 2,
“Consumables” for
details.

DRUM UNIT

INTERLOCK

The drum unit was not
pushed all the way in
after the last
maintenance.

Push the drum unit in
all the way and secure
with thumbscrew.
Refer to chapter 2,
“Consumables,” for
details.

DUPLEX JAM

Paper has jammed
while passing through
the duplexer.

Check area 6 inside
the front door. See
chapter 4, “Printer
Jams,”

DUPLEX JAM

Paper has jammed
while passing through
the duplexer.

Check areas 3-6 inside
the front door. See
chapter 4, “Printer
Jams,”

EXTENDED ACCOUNTING

FILE SIZE

The size of the non-
empty accounting file
has been increased
successfully.

No action necessary.

FEED PATH JAM

Paper has jammed in
the feed path.

Check areas 1 & 2
inside the front door.
See chapter 4, “Printer
Jams,”

This status message...

means...

do this...

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS 4060





















































































































































































































































































































































Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands

EDNord QMS 4060, Manual

Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands