EDNord QMS 4060, Manual

Page: 86 / 340

Introduction
QMS 4060 Print System Operation 3-2
Introduction
Investing a few minutes each week on your printer’s maintenance will
ensure a minimum of downtime and an extended printer life. Try to
assign someone to do cleaning and maintenance and follow the
instructions in this manual. Always perform the maintenance at the
recommended intervals.
Handling the Printer
Handle the printer with care to preserve its life. Abuse may cause
damage. Keep the following guidelines in mind:
n
Avoid spraying cleaning solution directly on the printer’s surface;
the spray could penetrate through the air vents of the printer and
damage the internal circuits.
n
Be careful when cleaning the inside or removing paper jams, as
the fuser and other internal parts become very hot.
n
Do not close the covers abruptly, or expose the printer to vibra-
tions.
n
Do not leave the printer open for any length of time, especially in
the sun or in well-lit places; light will damage the photosensitive
drum.
n
Do not open the printer during printing.
n
Do not place anything on top of the printer, the LCIF or the LCOS.
n
Do not attempt to disassemble the printer.
n
Make sure two people are available to lift the printer when moving
it. The printer weights about 298 lbs (135 kg); do not attempt to
move it by yourself.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500