EDNord QMS 4060, Manual

Page: 149 / 340

Message
Display and
Console Modes
6-9 Local and Remote Console
You are now ready to use remote console (see “Using Remote Con-
sole” on page 6-13).
» Note: If the operator password for your QMS printer is enabled, you
are prompted to enter it before you can use remote console. If you
enter an invalid password, the connection to remote console closes
automatically. Passwords can only be set or changed through the
printer’s control panel. See your printer user’s guide for more
information on passwords. Also, if you are at a local console, the
password does not appear on the screen as you type it.
Message Display and Console
Modes
The console can operate in several modes and can either have status
displayed or not displayed to the screen. The following sections
describe these modes.
Local and Remote Consoles
The console is a simple, line-oriented display of 24 lines of 80 charac-
ters. To list the available console commands, type
?
on the console
keyboard.
Message Display Mode
The message display mode can be set to either silent or normal. The
default for displaying status on a local console is normal, and the
default for a remote console is silent. When the message display
mode is enabled and set to normal, conditions that require user
intervention appear on a local or remote console. The TCP/IP
Accounting/Reverse Channel messages (if available) are seen in
normal mode, but not in silent mode.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500