EDNord QMS 4060 Manual Download Page 95

Page: 95 / 340

Cleaning the

Printer

3-11

Printer Care

If the fuser does not seat properly:

Hold the fuser up against the printer using light pressure.

Carefully rotate the decurler roller knob clockwise until the

fuser seats flush against the printer.

Repeat step 7.

Close the front door of the printer.

Cleaning the Reversing Unit

WARNING!

Turn off the printer, unplug the power cord, disconnect

any interface cables, and make sure that the fusing unit has cooled
down before cleaning.

ACHTUNG!

Schalten Sie vor der Reinigung bitte den Drucker aus,

ziehen den Netzstecker heraus und entfernen alle Kabel von den
Schnittstellenanschlüssen, bis die Fixiereinheit abgekühlt ist.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS 4060





















































































































































































































































































































































Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands

EDNord QMS 4060, Manual

Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands