EDNord QMS 4060, Manual

Page: 251 / 340

Output Problems
9-29 Troubleshooting Printer Problems
Output Problems
Not All Pages Print
If the printer stops printing in the middle of your file, try the following:
1 Check your cable.
You could have the wrong kind of cable, or your printer may not
be configured for the correct cable and port.
2 Make sure no one pressed the Cancel button while your job
was printing.
3 Check the message window to see if the tray you are using
needs more paper.
Paper Jams Always Occur
1 Check that the paper does not exceed the paper limit mark.
Make sure that the stack does not exceed the paper limit mark on
the paper tray.
2 Check that the paper stack is correctly aligned.
Make sure that the stack is correctly aligned in the paper tray or in
the multipurpose tray.
3 Check the printer for residual jammed paper.
4 Remove any jammed paper remaining inside the printer by
checking the locations in chapter 4, “Printer Jams.”
5 Make sure the tray paper size tabs match the type of paper
that is loaded. Check the display panel to see what the paper
size is for each tray.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500