EDNord QMS 4060, Manual

Page: 39 / 340

Replacing Toner,
Collector Bottle,
and Cleaning
Roller
2-15 Consumables
Transparencies: Special Considerations
Keep in mind the following considerations when printing
transparencies:
n
Use a typical brand such as 3M type PP2500 transparencies.
n
Use only transparency sizes letter or A4.
n
Transparencies must be able to withstand the heat generated by
the fuser (190° C/374° F), without melting.
n
Tap the stack of transparencies on a flat surface to align the
edges, before loading them. Remember, don’t fan the stack.
n
When handling transparencies, hold them by their edges and
avoid touching the print side.
n
Load transparencies printing side down. The correct print side is
usually marked on the transparency package. No more than 20
sheets should be loaded at one time.
n
Remember to keep the paper path clean. Transparencies are
especially sensitive to a dirty paper path. If there are shadows
either on the top or the bottom of the sheets, see chapter 3,
“Printer Care‚" for instructions on how to clean the paper path.
Replacing Toner, Collector
Bottle, and Cleaning Roller
Characters and images are created in your laser printer through a
process that applies toner to the page. During image formation, an
electrical charge is applied to the photosensitive drum to attract the
toner. The toner forms the image on the drum and then transfers the
image to the page. The photosensitive drum has characteristics simi-
lar to those of photographic film.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500