EDNord QMS 4060, Manual

Page: 181 / 340

Console
Commands
6-41 Local and Remote Console
Accessing the Printer Configuration Menu
Command config (menu)
Purpose Access the printer configuration menu to review and
change settings.
Mode admin
Notes The value in brackets [ ] is the current value for the
selection. If you want to change that value, enter the
desired value after the colon (:). The higher-level menu
defaults are 0’s. This allows you to exit from the menu
in the same order as you entered it.
Passwords can only be set or changed through the
printer’s control panel. Also, if you are at a local
console, the password does not appear on the screen
as you type it.
The config command accesses the printer
configuration menu, which may vary depending on your
printer (not all options are available on all QMS
printers). It accesses the same printer configuration
menu that is available through the control panel for your
specific printer. When you are in the printer
configuration menu, you can press the Return key to
return to the user mode or you can press the Return
key to advance one menu level with the following
exception: when the data type for a field is a character
string. In this case, anything you enter is accepted as
data for that field.
See the Reference manual for more information on
passwords and the configuration menu options that are
available on the printer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500