EDNord QMS 4060, Manual

Page: 151 / 340

Message
Display and
Console Modes
6-11 Local and Remote Console
With message display on, if a remote console session is active while
a job is active on the printer, the console screen displays
QMS 4060 Print System->
QMS 4060 Print System->Idle
QMS 4060 Print System->Starting job 0001
[Owner: Smith Name: mickey.ps]
QMS 4060 Print System->Input Idle Printing
Console Mode
System users and the system administrator can use the console for
different purposes. System users can use the console to check print
job status, cancel print jobs, or check certain printer configuration set-
tings. (See “User/Offline Mode Commands” on page 6-14 for a list of
commands available to users.) The system administrator can use the
console more extensively for printer configuration and file system
management. (See “Admin Mode Commands” on page 6-16 for a list
of the commands available to the administrator.
The console can operate in one of the following modes. The console
prompt indicates what mode the console is operating in.
n
User mode
This is the initial mode when a console session is opened. It is
indicated with the user prompt:
QMS 4060 Print System->
n
Offline mode
Use the offline command to put the printer off line for service, like
adding paper or toner. It is indicated with the offline prompt:
offline->
» Note: The console’s offline mode does not allow you to access
the configuration menus. The console’s admin mode, like the
printer control panel’s offline mode, allows system administrators
to access the configuration menus to change the printer
configuration.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500