EDNord QMS 4060 Manual Download Page 76

Page: 76 / 340

Replacing the Pick

Rollers

QMS 4060 Print System Operation

2-52

Grasp the outer roller and slip it off the shaft.

Grasp the inside torque limiter and pull it off the shaft.

Note that the limiter has two tabs sticking out. These tabs fit into
the roller slots.

10 Holding the new limiter with the tabs pointing towards you,

slip the limiter onto the shaft.

11 Turn the new limiter on the shaft until it locks into place.

12 Slip the new lower roller on the shaft and turn it until the lim-

iter tabs are seated into the roller holes.

Outer Roller

Torque Limiter

Outer Roller

Torque Limiter

Tabs

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for QMS 4060





















































































































































































































































































































































Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands

EDNord QMS 4060, Manual

Search results

Summary of Contents for QMS 4060

Reviews:

Related manuals for QMS 4060

Brands by name

Popular brands